heritageiop.blogg.se

1. #HAM RADIO DELUXE FORUM INSTALL#
2. #HAM RADIO DELUXE FORUM DRIVERS#
3. #HAM RADIO DELUXE FORUM UPDATE#
4. #HAM RADIO DELUXE FORUM DRIVER#
5. #HAM RADIO DELUXE FORUM WINDOWS 10#

You should have a basic knowledge of electronics and radio operations and you have to pass an exam to acquire an FCC license which is essential to operate a ham radio in the USA. All you need is proper equipment which can be from a simple radio receiver to a complex expensive broadcast station. It is a great hobby which is not only educational, entertaining but can also be a public service saving lives in times of need in an emergency.ĭo You Need A License to Operate a Ham Radio?Īmateur Radio Enthusiasts can be involved in this activity for many reasons. People use ham radio to talk within the city or across the other side of the world without using any conventional means of communication like a phone or the internet. Any one of them will work fine, but when you put a second one on the computer the chances there will be problems goes way up.Amateur Radio also called ham radio is a unique hobby and also a useful service that brings together people, radio, and communication together. I'm not a computer professional, but have just been stung too many times by VCM programs that can't work together. I would also do it in this order: disconnect the Microbit USB cable, reboot the computer, uninstall Microbit Setup Manager, reboot, then reinstall Microbit Setup Manager. I'd also suggest you uninstall, then reinstall the Microbit Setup Manager if you haven't already done so there may have been a glitch that prevented Win10 from realizing that those comports. It also sounds like you updated from Winxx to Win10, then tried your apps.

I do use the Microbit USB cable and do radio control through Com2 of it, and use ComExtra for the Winkey in the RRC, so I don't leave my K3Mini connected to USB (and the comports are never created for it). If you do, do you need all of them? In particular, I'm not sure why you leave your K3Mini connected to USB all the time- I've found no need to do so with mine. My suggestion is to look at your system in Device Manager, and see if you have multiple VCM. The one way communication you describe with the radio leads me to believe that you may a conflict with VCMs.

#HAM RADIO DELUXE FORUM INSTALL#

In its installation instructions, VSP Manager tells you to remove all other Virtual Comport Managers off your system before you install it. I've even seen it where problems don't exist today, but a week from now they do. Notice, I say, may- sometimes ops may have them on the same computer with no problems, other times they won't work from day 1. The Microham Virtual Comport Managers may not coexist with other VCMs. For example, the Virtual Comports created by VSP Manager, and those created by Microbit Setup Manager, may not coexist on the same computer without problems. I have found- through experience- that more than one VCM on your computer may cause you problems. Your problem sounds like it may be a Virtual Comport Manager (VCM) Problem.

#HAM RADIO DELUXE FORUM DRIVER#

may be there is a issue with the driver compatibiliy to Windows 10? Another possibility will be that the HRD 6.3 version has a problem with Windows 10. I do not know if the problem will be Windows 10, or may be the 1258 drivers. So I want to ask if anyone has the same problems.

#HAM RADIO DELUXE FORUM WINDOWS 10#

But before updating to Windows 10 and HRD 6.3 the frequency readout works. But if I change the frequency in the radio panel of HRD the frequency at the remote station and K3 mini will be changed. But if I tune on the K3 mini to another frequency the QRG on the HRD radio panel will not follow. The second problem is as follow: After starting HRD and connect to the K3 mini with the COM port for CAT the connection will be established and the frequency will be read out once and shown in the radio panel of HRD.

#HAM RADIO DELUXE FORUM DRIVERS#

I try updateing the drivers but without any positiv result. But in the USB port selection of HRD CW/RTTY setting some ports will be offered for the selection - like the K3 mini ports - but not the ports of the 1258. But in the device control I see the 4 COMs of the 1258 and also the 2 COMs of the K3 mini. The first problem is that I can not see the virtual COM ports of the RRC 1258 in HRD settings any more - for example for setting up CW RTS keying of RTTY FSK. I am using K3 mini connected to the 1258 for the RHR service.

#HAM RADIO DELUXE FORUM UPDATE#

Hello, I upgrade my PC from Win 7 to Win 10 and also update HRD to the latest version 6.3.